You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
This repo is archived. You can view files and clone it, but cannot push or open issues/pull-requests.
ndg/display/SSD1963.h

151 lines
4.8 KiB
C

/**
* @file SSD1963.h
*
*/
#ifndef SSD1963_H
#define SSD1963_H
#ifdef __cplusplus
extern "C" {
#endif
/*********************
* INCLUDES
*********************/
#ifndef LV_DRV_NO_CONF
#ifdef LV_CONF_INCLUDE_SIMPLE
#include "lv_drv_conf.h"
#else
#include "../../lv_drv_conf.h"
#endif
#endif
#if USE_SSD1963
#ifdef LV_LVGL_H_INCLUDE_SIMPLE
#include "lvgl.h"
#else
#include "lvgl/lvgl.h"
#endif
/*********************
* DEFINES
*********************/
// SSD1963 command table
#define CMD_NOP 0x00 //No operation
#define CMD_SOFT_RESET 0x01 //Software reset
#define CMD_GET_PWR_MODE 0x0A //Get the current power mode
#define CMD_GET_ADDR_MODE 0x0B //Get the frame memory to the display panel read order
#define CMD_GET_PIXEL_FORMAT 0x0C //Get the current pixel format
#define CMD_GET_DISPLAY_MODE 0x0D //Returns the display mode
#define CMD_GET_SIGNAL_MODE 0x0E //
#define CMD_GET_DIAGNOSTIC 0x0F
#define CMD_ENT_SLEEP 0x10
#define CMD_EXIT_SLEEP 0x11
#define CMD_ENT_PARTIAL_MODE 0x12
#define CMD_ENT_NORMAL_MODE 0x13
#define CMD_EXIT_INVERT_MODE 0x20
#define CMD_ENT_INVERT_MODE 0x21
#define CMD_SET_GAMMA 0x26
#define CMD_BLANK_DISPLAY 0x28
#define CMD_ON_DISPLAY 0x29
#define CMD_SET_COLUMN 0x2A
#define CMD_SET_PAGE 0x2B
#define CMD_WR_MEMSTART 0x2C
#define CMD_RD_MEMSTART 0x2E
#define CMD_SET_PARTIAL_AREA 0x30
#define CMD_SET_SCROLL_AREA 0x33
#define CMD_SET_TEAR_OFF 0x34 //synchronization information is not sent from the display
#define CMD_SET_TEAR_ON 0x35 //sync. information is sent from the display
#define CMD_SET_ADDR_MODE 0x36 //set fram buffer read order to the display panel
#define CMD_SET_SCROLL_START 0x37
#define CMD_EXIT_IDLE_MODE 0x38
#define CMD_ENT_IDLE_MODE 0x39
#define CMD_SET_PIXEL_FORMAT 0x3A //defines how many bits per pixel is used
#define CMD_WR_MEM_AUTO 0x3C
#define CMD_RD_MEM_AUTO 0x3E
#define CMD_SET_TEAR_SCANLINE 0x44
#define CMD_GET_SCANLINE 0x45
#define CMD_RD_DDB_START 0xA1
#define CMD_RD_DDB_AUTO 0xA8
#define CMD_SET_PANEL_MODE 0xB0
#define CMD_GET_PANEL_MODE 0xB1
#define CMD_SET_HOR_PERIOD 0xB4
#define CMD_GET_HOR_PERIOD 0xB5
#define CMD_SET_VER_PERIOD 0xB6
#define CMD_GET_VER_PERIOD 0xB7
#define CMD_SET_GPIO_CONF 0xB8
#define CMD_GET_GPIO_CONF 0xB9
#define CMD_SET_GPIO_VAL 0xBA
#define CMD_GET_GPIO_STATUS 0xBB
#define CMD_SET_POST_PROC 0xBC
#define CMD_GET_POST_PROC 0xBD
#define CMD_SET_PWM_CONF 0xBE
#define CMD_GET_PWM_CONF 0xBF
#define CMD_SET_LCD_GEN0 0xC0
#define CMD_GET_LCD_GEN0 0xC1
#define CMD_SET_LCD_GEN1 0xC2
#define CMD_GET_LCD_GEN1 0xC3
#define CMD_SET_LCD_GEN2 0xC4
#define CMD_GET_LCD_GEN2 0xC5
#define CMD_SET_LCD_GEN3 0xC6
#define CMD_GET_LCD_GEN3 0xC7
#define CMD_SET_GPIO0_ROP 0xC8
#define CMD_GET_GPIO0_ROP 0xC9
#define CMD_SET_GPIO1_ROP 0xCA
#define CMD_GET_GPIO1_ROP 0xCB
#define CMD_SET_GPIO2_ROP 0xCC
#define CMD_GET_GPIO2_ROP 0xCD
#define CMD_SET_GPIO3_ROP 0xCE
#define CMD_GET_GPIO3_ROP 0xCF
#define CMD_SET_ABC_DBC_CONF 0xD0
#define CMD_GET_ABC_DBC_CONF 0xD1
#define CMD_SET_DBC_HISTO_PTR 0xD2
#define CMD_GET_DBC_HISTO_PTR 0xD3
#define CMD_SET_DBC_THRES 0xD4
#define CMD_GET_DBC_THRES 0xD5
#define CMD_SET_ABM_TMR 0xD6
#define CMD_GET_ABM_TMR 0xD7
#define CMD_SET_AMB_LVL0 0xD8
#define CMD_GET_AMB_LVL0 0xD9
#define CMD_SET_AMB_LVL1 0xDA
#define CMD_GET_AMB_LVL1 0xDB
#define CMD_SET_AMB_LVL2 0xDC
#define CMD_GET_AMB_LVL2 0xDD
#define CMD_SET_AMB_LVL3 0xDE
#define CMD_GET_AMB_LVL3 0xDF
#define CMD_PLL_START 0xE0 //start the PLL
#define CMD_PLL_STOP 0xE1 //disable the PLL
#define CMD_SET_PLL_MN 0xE2
#define CMD_GET_PLL_MN 0xE3
#define CMD_GET_PLL_STATUS 0xE4 //get the current PLL status
#define CMD_ENT_DEEP_SLEEP 0xE5
#define CMD_SET_PCLK 0xE6 //set pixel clock (LSHIFT signal) frequency
#define CMD_GET_PCLK 0xE7 //get pixel clock (LSHIFT signal) freq. settings
#define CMD_SET_DATA_INTERFACE 0xF0
#define CMD_GET_DATA_INTERFACE 0xF1
/**********************
* TYPEDEFS
**********************/
/**********************
* GLOBAL PROTOTYPES
**********************/
void ssd1963_init(void);
void ssd1963_flush(lv_disp_drv_t * disp_drv, const lv_area_t * area, lv_color_t * color_p);
/**********************
* MACROS
**********************/
#endif /* USE_SSD1963 */
#ifdef __cplusplus
} /* extern "C" */
#endif
#endif /* SSD1963_H */