You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
505 lines
15 KiB
C
505 lines
15 KiB
C
/**
|
|
* @file lv_drv_conf.h
|
|
* Configuration file for v9.0.0-dev
|
|
*/
|
|
|
|
/*
|
|
* COPY THIS FILE AS lv_drv_conf.h
|
|
*/
|
|
|
|
/* clang-format off */
|
|
#if 0 /*Set it to "1" to enable the content*/
|
|
|
|
#ifndef LV_DRV_CONF_H
|
|
#define LV_DRV_CONF_H
|
|
|
|
#include "lv_conf.h"
|
|
|
|
/*********************
|
|
* DELAY INTERFACE
|
|
*********************/
|
|
#define LV_DRV_DELAY_INCLUDE <stdint.h> /*Dummy include by default*/
|
|
#define LV_DRV_DELAY_US(us) /*delay_us(us)*/ /*Delay the given number of microseconds*/
|
|
#define LV_DRV_DELAY_MS(ms) /*delay_ms(ms)*/ /*Delay the given number of milliseconds*/
|
|
|
|
/*********************
|
|
* DISPLAY INTERFACE
|
|
*********************/
|
|
|
|
/*------------
|
|
* Common
|
|
*------------*/
|
|
#define LV_DRV_DISP_INCLUDE <stdint.h> /*Dummy include by default*/
|
|
#define LV_DRV_DISP_CMD_DATA(val) /*pin_x_set(val)*/ /*Set the command/data pin to 'val'*/
|
|
#define LV_DRV_DISP_RST(val) /*pin_x_set(val)*/ /*Set the reset pin to 'val'*/
|
|
|
|
/*---------
|
|
* SPI
|
|
*---------*/
|
|
#define LV_DRV_DISP_SPI_CS(val) /*spi_cs_set(val)*/ /*Set the SPI's Chip select to 'val'*/
|
|
#define LV_DRV_DISP_SPI_WR_BYTE(data) /*spi_wr(data)*/ /*Write a byte the SPI bus*/
|
|
#define LV_DRV_DISP_SPI_WR_ARRAY(adr, n) /*spi_wr_mem(adr, n)*/ /*Write 'n' bytes to SPI bus from 'adr'*/
|
|
|
|
/*------------------
|
|
* Parallel port
|
|
*-----------------*/
|
|
#define LV_DRV_DISP_PAR_CS(val) /*par_cs_set(val)*/ /*Set the Parallel port's Chip select to 'val'*/
|
|
#define LV_DRV_DISP_PAR_SLOW /*par_slow()*/ /*Set low speed on the parallel port*/
|
|
#define LV_DRV_DISP_PAR_FAST /*par_fast()*/ /*Set high speed on the parallel port*/
|
|
#define LV_DRV_DISP_PAR_WR_WORD(data) /*par_wr(data)*/ /*Write a word to the parallel port*/
|
|
#define LV_DRV_DISP_PAR_WR_ARRAY(adr, n) /*par_wr_mem(adr,n)*/ /*Write 'n' bytes to Parallel ports from 'adr'*/
|
|
|
|
/***************************
|
|
* INPUT DEVICE INTERFACE
|
|
***************************/
|
|
|
|
/*----------
|
|
* Common
|
|
*----------*/
|
|
#define LV_DRV_INDEV_INCLUDE <stdint.h> /*Dummy include by default*/
|
|
#define LV_DRV_INDEV_RST(val) /*pin_x_set(val)*/ /*Set the reset pin to 'val'*/
|
|
#define LV_DRV_INDEV_IRQ_READ 0 /*pn_x_read()*/ /*Read the IRQ pin*/
|
|
|
|
/*---------
|
|
* SPI
|
|
*---------*/
|
|
#define LV_DRV_INDEV_SPI_CS(val) /*spi_cs_set(val)*/ /*Set the SPI's Chip select to 'val'*/
|
|
#define LV_DRV_INDEV_SPI_XCHG_BYTE(data) 0 /*spi_xchg(val)*/ /*Write 'val' to SPI and give the read value*/
|
|
|
|
/*---------
|
|
* I2C
|
|
*---------*/
|
|
#define LV_DRV_INDEV_I2C_START /*i2c_start()*/ /*Make an I2C start*/
|
|
#define LV_DRV_INDEV_I2C_STOP /*i2c_stop()*/ /*Make an I2C stop*/
|
|
#define LV_DRV_INDEV_I2C_RESTART /*i2c_restart()*/ /*Make an I2C restart*/
|
|
#define LV_DRV_INDEV_I2C_WR(data) /*i2c_wr(data)*/ /*Write a byte to the I1C bus*/
|
|
#define LV_DRV_INDEV_I2C_READ(last_read) 0 /*i2c_rd()*/ /*Read a byte from the I2C bud*/
|
|
|
|
|
|
/*********************
|
|
* DISPLAY DRIVERS
|
|
*********************/
|
|
|
|
/*-------------------
|
|
* SDL
|
|
*-------------------*/
|
|
|
|
/* SDL based drivers for display, mouse, mousewheel and keyboard*/
|
|
#ifndef USE_SDL
|
|
# define USE_SDL 0
|
|
#endif
|
|
|
|
/* Hardware accelerated SDL driver */
|
|
#ifndef USE_SDL_GPU
|
|
# define USE_SDL_GPU 0
|
|
#endif
|
|
|
|
#if USE_SDL || USE_SDL_GPU
|
|
# define SDL_HOR_RES 480
|
|
# define SDL_VER_RES 320
|
|
|
|
/* Scale window by this factor (useful when simulating small screens) */
|
|
# define SDL_ZOOM 1
|
|
|
|
/* Used to test true double buffering with only address changing.
|
|
* Use 2 draw buffers, bith with SDL_HOR_RES x SDL_VER_RES size*/
|
|
# define SDL_DOUBLE_BUFFERED 0
|
|
|
|
/*Eclipse: <SDL2/SDL.h> Visual Studio: <SDL.h>*/
|
|
# define SDL_INCLUDE_PATH <SDL2/SDL.h>
|
|
|
|
/*Open two windows to test multi display support*/
|
|
# define SDL_DUAL_DISPLAY 0
|
|
|
|
/* Window Title */
|
|
# define SDL_WINDOW_TITLE "TFT Simulator"
|
|
#endif
|
|
|
|
/*-------------------
|
|
* Monitor of PC
|
|
*-------------------*/
|
|
|
|
/*DEPRECATED: Use the SDL driver instead. */
|
|
#ifndef USE_MONITOR
|
|
# define USE_MONITOR 0
|
|
#endif
|
|
|
|
#if USE_MONITOR
|
|
# define MONITOR_HOR_RES 480
|
|
# define MONITOR_VER_RES 320
|
|
|
|
/* Scale window by this factor (useful when simulating small screens) */
|
|
# define MONITOR_ZOOM 1
|
|
|
|
/* Used to test true double buffering with only address changing.
|
|
* Use 2 draw buffers, bith with MONITOR_HOR_RES x MONITOR_VER_RES size*/
|
|
# define MONITOR_DOUBLE_BUFFERED 0
|
|
|
|
/*Eclipse: <SDL2/SDL.h> Visual Studio: <SDL.h>*/
|
|
# define MONITOR_SDL_INCLUDE_PATH <SDL2/SDL.h>
|
|
|
|
/*Open two windows to test multi display support*/
|
|
# define MONITOR_DUAL 0
|
|
#endif
|
|
|
|
/*-----------------------------------
|
|
* Native Windows (including mouse)
|
|
*----------------------------------*/
|
|
#ifndef USE_WINDOWS
|
|
# define USE_WINDOWS 0
|
|
#endif
|
|
|
|
#if USE_WINDOWS
|
|
# define WINDOW_HOR_RES 480
|
|
# define WINDOW_VER_RES 320
|
|
#endif
|
|
|
|
/*----------------------------
|
|
* Native Windows (win32drv)
|
|
*---------------------------*/
|
|
#ifndef USE_WIN32DRV
|
|
# define USE_WIN32DRV 0
|
|
#endif
|
|
|
|
#if USE_WIN32DRV
|
|
/* Scale window by this factor (useful when simulating small screens) */
|
|
# define WIN32DRV_MONITOR_ZOOM 1
|
|
#endif
|
|
|
|
/*----------------------------------------
|
|
* GTK drivers (monitor, mouse, keyboard
|
|
*---------------------------------------*/
|
|
#ifndef USE_GTK
|
|
# define USE_GTK 0
|
|
#endif
|
|
|
|
/*----------------------------------------
|
|
* Wayland drivers (monitor, mouse, keyboard, touchscreen)
|
|
*---------------------------------------*/
|
|
#ifndef USE_WAYLAND
|
|
# define USE_WAYLAND 0
|
|
#endif
|
|
|
|
#if USE_WAYLAND
|
|
/* Support for client-side decorations */
|
|
# ifndef LV_WAYLAND_CLIENT_SIDE_DECORATIONS
|
|
# define LV_WAYLAND_CLIENT_SIDE_DECORATIONS 1
|
|
# endif
|
|
/* Support for (deprecated) wl-shell protocol */
|
|
# ifndef LV_WAYLAND_WL_SHELL
|
|
# define LV_WAYLAND_WL_SHELL 1
|
|
# endif
|
|
/* Support for xdg-shell protocol */
|
|
# ifndef LV_WAYLAND_XDG_SHELL
|
|
# define LV_WAYLAND_XDG_SHELL 0
|
|
# endif
|
|
#endif
|
|
|
|
/*----------------------------------------
|
|
* X11 drivers (monitor, mouse, keyboard)
|
|
*---------------------------------------*/
|
|
#ifndef USE_X11
|
|
# define USE_X11 0
|
|
#endif
|
|
|
|
/*----------------
|
|
* SSD1963
|
|
*--------------*/
|
|
#ifndef USE_SSD1963
|
|
# define USE_SSD1963 0
|
|
#endif
|
|
|
|
#if USE_SSD1963
|
|
# define SSD1963_HOR_RES LV_HOR_RES
|
|
# define SSD1963_VER_RES LV_VER_RES
|
|
# define SSD1963_HT 531
|
|
# define SSD1963_HPS 43
|
|
# define SSD1963_LPS 8
|
|
# define SSD1963_HPW 10
|
|
# define SSD1963_VT 288
|
|
# define SSD1963_VPS 12
|
|
# define SSD1963_FPS 4
|
|
# define SSD1963_VPW 10
|
|
# define SSD1963_HS_NEG 0 /*Negative hsync*/
|
|
# define SSD1963_VS_NEG 0 /*Negative vsync*/
|
|
# define SSD1963_ORI 0 /*0, 90, 180, 270*/
|
|
# define SSD1963_COLOR_DEPTH 16
|
|
#endif
|
|
|
|
/*----------------
|
|
* R61581
|
|
*--------------*/
|
|
#ifndef USE_R61581
|
|
# define USE_R61581 0
|
|
#endif
|
|
|
|
#if USE_R61581
|
|
# define R61581_HOR_RES LV_HOR_RES
|
|
# define R61581_VER_RES LV_VER_RES
|
|
# define R61581_HSPL 0 /*HSYNC signal polarity*/
|
|
# define R61581_HSL 10 /*HSYNC length (Not Implemented)*/
|
|
# define R61581_HFP 10 /*Horitontal Front poarch (Not Implemented)*/
|
|
# define R61581_HBP 10 /*Horitontal Back poarch (Not Implemented */
|
|
# define R61581_VSPL 0 /*VSYNC signal polarity*/
|
|
# define R61581_VSL 10 /*VSYNC length (Not Implemented)*/
|
|
# define R61581_VFP 8 /*Vertical Front poarch*/
|
|
# define R61581_VBP 8 /*Vertical Back poarch */
|
|
# define R61581_DPL 0 /*DCLK signal polarity*/
|
|
# define R61581_EPL 1 /*ENABLE signal polarity*/
|
|
# define R61581_ORI 0 /*0, 180*/
|
|
# define R61581_LV_COLOR_DEPTH 16 /*Fix 16 bit*/
|
|
#endif
|
|
|
|
/*------------------------------
|
|
* ST7565 (Monochrome, low res.)
|
|
*-----------------------------*/
|
|
#ifndef USE_ST7565
|
|
# define USE_ST7565 0
|
|
#endif
|
|
|
|
#if USE_ST7565
|
|
/*No settings*/
|
|
#endif /*USE_ST7565*/
|
|
|
|
/*------------------------------
|
|
* GC9A01 (color, low res.)
|
|
*-----------------------------*/
|
|
#ifndef USE_GC9A01
|
|
# define USE_GC9A01 0
|
|
#endif
|
|
|
|
#if USE_GC9A01
|
|
/*No settings*/
|
|
#endif /*USE_GC9A01*/
|
|
|
|
/*------------------------------------------
|
|
* UC1610 (4 gray 160*[104|128])
|
|
* (EA DOGXL160 160x104 tested)
|
|
*-----------------------------------------*/
|
|
#ifndef USE_UC1610
|
|
# define USE_UC1610 0
|
|
#endif
|
|
|
|
#if USE_UC1610
|
|
# define UC1610_HOR_RES LV_HOR_RES
|
|
# define UC1610_VER_RES LV_VER_RES
|
|
# define UC1610_INIT_CONTRAST 33 /* init contrast, values in [%] */
|
|
# define UC1610_INIT_HARD_RST 0 /* 1 : hardware reset at init, 0 : software reset */
|
|
# define UC1610_TOP_VIEW 0 /* 0 : Bottom View, 1 : Top View */
|
|
#endif /*USE_UC1610*/
|
|
|
|
/*-------------------------------------------------
|
|
* SHARP memory in pixel monochrome display series
|
|
* LS012B7DD01 (184x38 pixels.)
|
|
* LS013B7DH03 (128x128 pixels.)
|
|
* LS013B7DH05 (144x168 pixels.)
|
|
* LS027B7DH01 (400x240 pixels.) (tested)
|
|
* LS032B7DD02 (336x536 pixels.)
|
|
* LS044Q7DH01 (320x240 pixels.)
|
|
*------------------------------------------------*/
|
|
#ifndef USE_SHARP_MIP
|
|
# define USE_SHARP_MIP 0
|
|
#endif
|
|
|
|
#if USE_SHARP_MIP
|
|
# define SHARP_MIP_HOR_RES LV_HOR_RES
|
|
# define SHARP_MIP_VER_RES LV_VER_RES
|
|
# define SHARP_MIP_SOFT_COM_INVERSION 0
|
|
# define SHARP_MIP_REV_BYTE(b) /*((uint8_t) __REV(__RBIT(b)))*/ /*Architecture / compiler dependent byte bits order reverse*/
|
|
#endif /*USE_SHARP_MIP*/
|
|
|
|
/*-------------------------------------------------
|
|
* ILI9341 240X320 TFT LCD
|
|
*------------------------------------------------*/
|
|
#ifndef USE_ILI9341
|
|
# define USE_ILI9341 0
|
|
#endif
|
|
|
|
#if USE_ILI9341
|
|
# define ILI9341_HOR_RES LV_HOR_RES
|
|
# define ILI9341_VER_RES LV_VER_RES
|
|
# define ILI9341_GAMMA 1
|
|
# define ILI9341_TEARING 0
|
|
#endif /*USE_ILI9341*/
|
|
|
|
/*-----------------------------------------
|
|
* Linux frame buffer device (/dev/fbx)
|
|
*-----------------------------------------*/
|
|
#ifndef USE_FBDEV
|
|
# define USE_FBDEV 0
|
|
#endif
|
|
|
|
#if USE_FBDEV
|
|
# define FBDEV_PATH "/dev/fb0"
|
|
#endif
|
|
|
|
/*-----------------------------------------
|
|
* FreeBSD frame buffer device (/dev/fbx)
|
|
*.........................................*/
|
|
#ifndef USE_BSD_FBDEV
|
|
# define USE_BSD_FBDEV 0
|
|
#endif
|
|
|
|
#if USE_BSD_FBDEV
|
|
# define FBDEV_PATH "/dev/fb0"
|
|
#endif
|
|
|
|
/*-----------------------------------------
|
|
* DRM/KMS device (/dev/dri/cardX)
|
|
*-----------------------------------------*/
|
|
#ifndef USE_DRM
|
|
# define USE_DRM 0
|
|
#endif
|
|
|
|
#if USE_DRM
|
|
# define DRM_CARD "/dev/dri/card0"
|
|
# define DRM_CONNECTOR_ID -1 /* -1 for the first connected one */
|
|
#endif
|
|
|
|
/*********************
|
|
* INPUT DEVICES
|
|
*********************/
|
|
|
|
/*--------------
|
|
* XPT2046
|
|
*--------------*/
|
|
#ifndef USE_XPT2046
|
|
# define USE_XPT2046 0
|
|
#endif
|
|
|
|
#if USE_XPT2046
|
|
# define XPT2046_HOR_RES 480
|
|
# define XPT2046_VER_RES 320
|
|
# define XPT2046_X_MIN 200
|
|
# define XPT2046_Y_MIN 200
|
|
# define XPT2046_X_MAX 3800
|
|
# define XPT2046_Y_MAX 3800
|
|
# define XPT2046_AVG 4
|
|
# define XPT2046_X_INV 0
|
|
# define XPT2046_Y_INV 0
|
|
# define XPT2046_XY_SWAP 0
|
|
#endif
|
|
|
|
/*-----------------
|
|
* FT5406EE8
|
|
*-----------------*/
|
|
#ifndef USE_FT5406EE8
|
|
# define USE_FT5406EE8 0
|
|
#endif
|
|
|
|
#if USE_FT5406EE8
|
|
# define FT5406EE8_I2C_ADR 0x38 /*7 bit address*/
|
|
#endif
|
|
|
|
/*---------------
|
|
* AD TOUCH
|
|
*--------------*/
|
|
#ifndef USE_AD_TOUCH
|
|
# define USE_AD_TOUCH 0
|
|
#endif
|
|
|
|
#if USE_AD_TOUCH
|
|
/*No settings*/
|
|
#endif
|
|
|
|
|
|
/*---------------------------------------
|
|
* Mouse or touchpad on PC (using SDL)
|
|
*-------------------------------------*/
|
|
/*DEPRECATED: Use the SDL driver instead. */
|
|
#ifndef USE_MOUSE
|
|
# define USE_MOUSE 0
|
|
#endif
|
|
|
|
#if USE_MOUSE
|
|
/*No settings*/
|
|
#endif
|
|
|
|
/*-------------------------------------------
|
|
* Mousewheel as encoder on PC (using SDL)
|
|
*------------------------------------------*/
|
|
/*DEPRECATED: Use the SDL driver instead. */
|
|
#ifndef USE_MOUSEWHEEL
|
|
# define USE_MOUSEWHEEL 0
|
|
#endif
|
|
|
|
#if USE_MOUSEWHEEL
|
|
/*No settings*/
|
|
#endif
|
|
|
|
/*-------------------------------------------------
|
|
* Touchscreen, mouse/touchpad or keyboard as libinput interface (for Linux based systems)
|
|
*------------------------------------------------*/
|
|
#ifndef USE_LIBINPUT
|
|
# define USE_LIBINPUT 0
|
|
#endif
|
|
|
|
#ifndef USE_BSD_LIBINPUT
|
|
# define USE_BSD_LIBINPUT 0
|
|
#endif
|
|
|
|
#if USE_LIBINPUT || USE_BSD_LIBINPUT
|
|
/*If only a single device of the same type is connected, you can also auto detect it, e.g.:
|
|
*#define LIBINPUT_NAME libinput_find_dev(LIBINPUT_CAPABILITY_TOUCH, false)*/
|
|
# define LIBINPUT_NAME "/dev/input/event0" /*You can use the "evtest" Linux tool to get the list of devices and test them*/
|
|
|
|
#endif /*USE_LIBINPUT || USE_BSD_LIBINPUT*/
|
|
|
|
/*-------------------------------------------------
|
|
* Mouse or touchpad as evdev interface (for Linux based systems)
|
|
*------------------------------------------------*/
|
|
#ifndef USE_EVDEV
|
|
# define USE_EVDEV 0
|
|
#endif
|
|
|
|
#ifndef USE_BSD_EVDEV
|
|
# define USE_BSD_EVDEV 0
|
|
#endif
|
|
|
|
#if USE_EVDEV || USE_BSD_EVDEV
|
|
# define EVDEV_NAME "/dev/input/event0" /*You can use the "evtest" Linux tool to get the list of devices and test them*/
|
|
# define EVDEV_SWAP_AXES 0 /*Swap the x and y axes of the touchscreen*/
|
|
|
|
# define EVDEV_CALIBRATE 0 /*Scale and offset the touchscreen coordinates by using maximum and minimum values for each axis*/
|
|
|
|
# if EVDEV_CALIBRATE
|
|
# define EVDEV_HOR_MIN 0 /*to invert axis swap EVDEV_XXX_MIN by EVDEV_XXX_MAX*/
|
|
# define EVDEV_HOR_MAX 4096 /*"evtest" Linux tool can help to get the correct calibraion values>*/
|
|
# define EVDEV_VER_MIN 0
|
|
# define EVDEV_VER_MAX 4096
|
|
# endif /*EVDEV_CALIBRATE*/
|
|
#endif /*USE_EVDEV*/
|
|
|
|
/*-------------------------------------------------
|
|
* Full keyboard support for evdev and libinput interface
|
|
*------------------------------------------------*/
|
|
# ifndef USE_XKB
|
|
# define USE_XKB 0
|
|
# endif
|
|
|
|
#if USE_LIBINPUT || USE_BSD_LIBINPUT || USE_EVDEV || USE_BSD_EVDEV
|
|
# if USE_XKB
|
|
# define XKB_KEY_MAP { .rules = NULL, \
|
|
.model = "pc101", \
|
|
.layout = "us", \
|
|
.variant = NULL, \
|
|
.options = NULL } /*"setxkbmap -query" can help find the right values for your keyboard*/
|
|
# endif /*USE_XKB*/
|
|
#endif /*USE_LIBINPUT || USE_BSD_LIBINPUT || USE_EVDEV || USE_BSD_EVDEV*/
|
|
|
|
/*-------------------------------
|
|
* Keyboard of a PC (using SDL)
|
|
*------------------------------*/
|
|
/*DEPRECATED: Use the SDL driver instead. */
|
|
#ifndef USE_KEYBOARD
|
|
# define USE_KEYBOARD 0
|
|
#endif
|
|
|
|
#if USE_KEYBOARD
|
|
/*No settings*/
|
|
#endif
|
|
|
|
#endif /*LV_DRV_CONF_H*/
|
|
|
|
#endif /*End of "Content enable"*/
|